22-2, Jalan Klang Sentral 8/KU5,
Klang Sentral, Bukit Raja, Meru,
41050 Klang,
Selangor, Malaysia.
+6016-984 2326
WH Paint Sdn Bhd
22-2, Jalan Klang Sentral 8/KU5,
Klang Sentral, Bukit Raja, Meru,
41050 Klang,
Selangor, Malaysia.
22-2, Jalan Klang Sentral 8/KU5,
Klang Sentral, Bukit Raja, Meru,
41050 Klang,
Selangor, Malaysia.
WH SWW 1532 Anti Sticker [Clear]
Product Description
SWW 1532 Anti Sticker is a one-component unique and special blended waterbase synthetic coating which upon drying, forms a permanent non-stick surface, preventing adhesion of sticky glue, stickers, bird nesting, etc.
Intended Uses
SWW 1532 is used to paint onto painted surfaces, including metal, zinc, wall tiles, road signboards, etc. It dries to form a slightly opaque to clear coating which provides excellent anti-adhesion properties, so that stickers can be easily peeled-off from all surfaces treated with SWW 1532.
Advantages
Requirement
Surfaces to be treated with SWW 1532 must be clean, dry, firm and free from oil, dust, grease and dirt.
SWW 1532 Anti Sticker is a one-component unique and special blended waterbase synthetic coating which upon drying, forms a permanent non-stick surface, preventing adhesion of sticky glue, stickers, bird nesting, etc.
Intended Uses
SWW 1532 is used to paint onto painted surfaces, including metal, zinc, wall tiles, road signboards, etc. It dries to form a slightly opaque to clear coating which provides excellent anti-adhesion properties, so that stickers can be easily peeled-off from all surfaces treated with SWW 1532.
Advantages
- Excellent outdoor resistance against rain and u.v. light.
- Slight opaque to clear coating suitable as top coat.
- Contains fungicide to prevent moss and fungus growth.
- Easy to apply by brush or roller.
- Cleaning - easy cleaning by water - application means.
- Provides long lasting coating.
- Strong anti-stick properties thus discouraging unwanted pasting of stickers.
- Significantly reduces small bird nestings where they are not wanted.
Requirement
Surfaces to be treated with SWW 1532 must be clean, dry, firm and free from oil, dust, grease and dirt.
Regulatory Data
- Bare cement / concrete or high absorbent surfaces should first be primed with one coat of SWW 1532 diluted with water in the ratio of 1:½.
- Not recommended for PP/OPP/PE surfaces.
- Best results are obtained wih 2-3 coatings.
- An appropriate inter - coat setting time is required. The usual setting time varies from approx. 15-30 mins on a hot, dry, day to a longer period on wet or colder days.
- Coverage is approx. 6m/litre, and can vary according to surface absorbance and leveling.
Storage
1 year if kept indoor and away from extremes of weather.